Bob England, hang glider designer


Home (contents) Bob England, hang glider designer

Bob England, hang glider designer

Bob England likely in early 1980
Bob England likely in early 1980. Photographer not recorded.

Bob England spent his early years on Guernsey, an island close to the northern coast of France, but mostly the folks there speak English. (3)

Some images on this page are artistic derivations of contemporary photos. See Copyright of early hang gliding photos.


Bob England with his Moonraker 78 at Kossen in 1978
Bob England with his Moonraker 78 at Kössen in 1978. Photo by Roly Lewis-Evans.

He was a top pilot in the 1970s. For example, flying a Birdman Moonraker 78 he placed second in ‘class 2’ (flex-wings) of the 1978 European open championships at Kössen, Austria(9). See a film clip of him launching there under External links later on this page.

Gannet

The Gannet, which as far as is known to this author was Bob England’s first design, was successor of Miles Handley’s Gryphon, although it also resembled Ian Grayland’s Sigma, which, although designed in 1978, reached production in 1980; the year after the Gannet did(10). Together with the Southdown Sailwings Sigma and the Spectra Aolus (Flexiform Sealander in Britain) the Gannet was the last of the bowsprit-rigged high performance hang gliders.

Art based on a photo by Seaphot of Bob England flying the Gannet
Bob England flying the Gannet. Photo by Seaphot.

This photo was taken at Pandy, south Wales, on Sunday April 15th, 1979.(8)

On an overcast day in 1979 at Hatterall Hill, Pandy, South Wales, there had been some failed attempts to soar in ridge lift, resulting in forced landings in a field at the bottom of the hill. However, Bob flew a difficult route in the Gannet and top landed. He then lent the Gannet to two other pilots, who were amazed to be able to do the same. Then Andy Billingham reluctantly clipped in to the Gannet…

Two steps forward and I was off, a louder than normal whistling sound coming from the unconventional layout of rigging wires. The handling impressed me immediately. The controls had a reassuringly taut feel and a turn was easy enough to initiate. Once in the turn there was a slight feeling of inertia taking over but in fact the glider straightened up quite readily with little in the way of control lag. It did give the impression that it might be a bit of a handful in really rough air but in the fairly smooth conditions on the day it sailed along beautifully.

— Andy Billingham (1)

Billingham completed the flight back to the common and made a good top landing. He relates that everyone there at that time realized that Bob had created something special.

Bob England and the Gannet
Bob England and the Gannet in Guatemala, 1979. Photo by Mark Junak.

The knotted chord loops on the prototype Gannet — instead of the stand-up keel pocket usual at this time — facilitated adjusting the depth and profile of the root chord.(1)

Author’s reminiscence: On the day on which I took the photo of the yellow Gannet, which according to my log book was in May or July 1980, some of my work colleagues came along to watch. We sat in the car, parked just along from the rigging and take off area on the hill top at Mill Hill near Shoreham on the Sussex downs, and watched Bob in the Gannet hanging high in the sky, almost motionless. (A result of flying directly into a strong wind created by thermal lift.) One of my friends said, “What’s he making use of there?”

“His hang glider,” I replied. (Kind of almost like humor.) I like to think I expanded on that a bit with some theory of ridge and thermal lift, but I don’t recall. It was not a silly question though. A hang glider — unpowered — barely moving high above the hill and well out of the reach of ‘mechanical’ ridge lift imparts a sense of other-worldliness that demands explanation.

Photo of a 1980 hang glider
The Gannet, flown here by its designer Bob England and photographed by the author in 1980

Although not for the complete novice, the Gannet was not difficult to fly and had many characteristics sure to please a keen pilot.

— Andy Billingham (1)

Waspair Gannet in 1979
Described as the ‘new Wasp’ in the October 1979 British hang gliding magazine, this is Alan Weeks flying it. Photo by Dave Perrin.

Waspair of Croydon, south London, manufactured the Gannet as the Super Gryphon and they continued to do so after their relocation in 1980 to West Sacramento, California.(7) See also the Waspair of Surrey, England related topics menu.

Note the more usual (for that time) sailcloth stand-up keel pocket.


Mike Hibbitt launching in a Wasp Gannet/Super Gryphon hang glider
Mike Hibbit launching in a Wasp Gannet/Super Gryphon at Milk Hill, Wiltshire, England, in 1980. Photo by John Wadsworth.

Incidentally, the bowsprit configuration, while not competitive at the top of the performance range after 1980, confers some advantages. Bautek of Austria continued making Bowsprit gliders until that factory closed in 2020.


Bob described the scenery from a hang glider pilot’s viewpoint on a cross-country flight in early 1980:

The intense richness of the Wiltshire and eventually the Dorset countryside was very vivid from the air. Smooth textured farmland was bejewelled by a procession of stately homes, and ye olde villages sprouted mushroom-like with tufted thatched cottages sewn amongst snug hollows and copse strewn valleys.

— Bob England writing in the Avon Hang Gliding Club magazine, May 1980

He made that flight in a borrowed Atlas; a type made in France that surpassed the Gannet and its rivals before it too was superseded at the top level of hang glider performance by the Ultralight Products Comet. All in 1980!

Demon

Flight Designs Demon advert in Glider Rider, March 1982
Flight Designs Demon advert in Glider Rider, March 1982. Reprinted courtesy Light Sport and Ultralight Flying magazine.

Inspired by the aforementioned UP Comet, Bob went on to create the double-surface enclosed cross-tube Hiway Demon. (See the Hiway of Sussex, England, and Abergavenny, Wales related topics menu.)

I worked with him at Hiway in their South Wales factory for a short time. We made an extra large Demon as I remember, for a heavy customer. Bob drew out the sail and I did all the machining. They then got me to test fly it on a trike. Think someone flew it before my flight, but remember it was getting late. They had a short strip outside their Tredegar factory. Anyway got pretty high and remember cruising around for ages. Happy days.

— Roly Lewis-Evans (2)

Demon with Jetwing trike power unit
Demon with Flight Designs Jetwing trike power unit. Reprinted courtesy Light Sport and Ultralight Flying magazine.
Bob England photo by John Zurlinden in 1982 or 83
Bob England photo by John Zurlinden in 1982 or 83
Art based on a photo by Max Peterson of Jim Johns opening the proceedings in a Demon hang glider
Art based on a photo by Max Peterson of Jim Johns opening the proceedings in a Demon at the annual Marina Beach races in 1982

The Demon was built under licence by Flight Designs of California. See Marty Alameda and Flight Designs, which includes more about the Demon and the flying at Marina Beach near Monterey.

Streak

Bob England in June 1982 by Ines Roberts
Bob England in the U.S.A., June 1982, by Ines Roberts

Bob went to California before Hiway Hang Gliders of Abergavenny, Wales, ceased trading in March 1983. Bob’s next successful design there was the Bennett Delta Wing Kites and Gliders Streak. The Streak featured an under-surface that was detached from the upper surface at its trailing edge.

For a description of a similar arrangement, see the technical section under Shark in Graeme Bird’s hang gliders. See also the Bill Bennett’s Delta Wing Kites and Gliders related topics menu.

Not only was he British hang gliding champion at one point, but he was an influential designer as well. Think of all the designs he had a hand in: the Gannet, the Demon, the Streak, the Eclipse, and a few that never saw production… what made his story more complicated was that he made all these designs (or modifications) for different companies…

— John LaTorre (6)

Art based on a photo by John Zurlinden of John Ryan in a Bennet Streak (designed by Bob England) at Torrey pines, San Diego
John Ryan in a Bennett Streak at Torrey pines, San Diego. Photo by John Zurlinden.

See also the Torrey Pines page.

The Streak was an excellent glider that pilots continued to fly fifteen years after the glider first appeared. Bill Bennett donated six of the hang gliders made by his company, including a Streak 130, to the National Air and Space Museum in 1984.

— National Air and Space Museum (5)

Eclipse

Bob left Bennett in early 1984 and rented independent space at the Pacific Windcraft factory in Salinas, California(4). There, fortunately for this history, he encountered sailmaker, manufacturing manager, and writer John LaTorre.

I remember Bobby as an impish, devilish character, full of fun and surprises, but with a heart of gold. His impression of Charles Laughton as Quasimodo in “The Hunchback of Notre Dame” was unforgettable.

— John LaTorre (6)

Dune soaring in 1983
Dune soaring at Monterey Beach in 1983 by Dennis Thorpe

On one flight test day at Marina Beach, John LaTorre lost his wallet…

The wind gods were kind to us that day, so we could go the entire three miles of ridge line that we had been flying. (If I remember correctly, the red flag was flying to show us that the firing range at Fort Ord was “hot” and we weren’t permitted to fly farther than that). We flew back and forth across that stretch, flying only feet or even inches off the ground. That may sound extreme to anybody but a beach pilot, but we were doing that all the time at Marina Beach anyway. I eventually saw a brown lump in the sand, landed, and found my wallet. Bob was somewhere overhead, wondering if I was all right. I held up the wallet, and he waved and returned to the parking lot.

I took my glider up to the next dune, relaunched, and joined him there a few minutes later. The fact that Bob had taken so much time to help me look for my wallet meant a lot to me but, in retrospect, I think he would have flown with me, skimming across the ground, just for the fun of it.

— John LaTorre (6)

Pacific Windcraft/Hiway Eclipse
Eclipse photo from British Hang Gliding Museum, so likely a Hiway-built example (no larger imaga available)

Designed by Bob England and Jean-Michel Bernasconi, the 1985 Eclipse was known for its extraordinarily light handling and its resistance to stalling. It was built in the Pacific Windcraft factory in California and at another facility at Lookout Mountain, Tennessee. (Pacific Windcraft effectively succeeded Flight Designs as the hang glider manufacturer in the Salinas valley.)

And when Bob flight tested the Eclipse…

He’d fly around for a while, land, and do a modification of the airfoil, but … here’s the kicker… he’d do it on one side only, and leave the other side as it was. When I questioned him about it, he replied that this was his favorite way of testing airfoils. If the modified side flew better than the other one, inducing a turn in the opposite direction, he knew he was on the right track. And he could tell which side wanted to stall first. I never would have thought of that.

— John LaTorre (6)

See also Eclipse in Jean-Michel Bernasconi and Pacific Windcraft.


Sometime around 1990, he showed up at the Pacific Airwave factory with a new design he was working on. It was a “bow wing” that had two fiberglass leading edges that were plugged into a nose socket at the front of the keel. The leading edges were bent into a bow shape and the sail was connected to their tips, resulting in a glider with a nearly flat, highly tensioned trailing edge. There was no crossbar. (I didn’t think to ask him if he’d ever heard of the ASG 23, a similar design by Tom Price back in the 1970s, but since nobody else outside Electra Flyer or Tom’s circle had never heard of it, my guess is that Bob came up with the idea on his own.) Preformed ribs were slid into the sail, the control bar (A-frame) was attached, and “Bob’s your uncle.”

It never flew really well, and Bob wasn’t really out to make a high-performing glider, but one that anybody could buy for peanuts and have a little fun with on a convenient hill or sand dune. Anyway, Jean-Michel [Bernasconi], Bob, a few other people, and myself had a blast doing sled rides off the ramp at Marina Beach.

Bob or Jean-Michel would take out the ribs and bend them this way and that, and off we’d go again for another round. For just that moment, I remembered what flying “standards” fifteen year ago used to be like… a lot of people taking sled rides down a hill and having the time of their lives.

— John LaTorre (6)

Bob England was killed in 1996 flying a paraglider at Torrey Pines. (1)

Related

John LaTorre related topics menu

Miles Wings Gulp and Gryphon related topics menu

Roly Lewis-Evans, sail maker, related topics menu

Skyhook Sailwings: John LaTorre comments on the Flight Designs Demon, a licence-built version of the Hiway Demon, in comments/thoughts section

South downs in Hang gliding early 1980s part 1 for the Sigma

Spectra Aolus

External links

Bob England launching in a Birdman Moonraker 78 at Kössen, Austria, filmed in 1978 by John Hunt (video titled kossen on Haydn K’s YouTube channel starting at 3 minutes 13 seconds)

Bob England testing the prototype Gannet; filmed in 1979 by John Hunt (video titled kossen on Haydn K’s YouTube channel starting at 21 minutes 33 seconds)

Prototype Gannet photo by Roger Middleton. Info accompanying the photo (as of June 2020) states that it is the similar Southdown Sailwings Sigma. However, several experts agree that it is Bob England in the prototype Gannet.

References

1. Bob England by Andy Billingham, 2009, in British Hang Gliding History

2. Roland Lewis-Evans e-mail correspondence with the author, May 2019

3. Conversations with early hang glider pilot and noted paraglider pilot Jeremy Calderwood in the mid-late 2010s, and Whole Air No. 23, March-April 1982

4. Bob England left Bennett and rented independent space at the Pacific Windcraft factory: Product Lines by Dan Johnson in Whole Air No. 36, June 1984

5. Text accompanying this Streak photo page on the National Air & Space Museum web site

6. John LaTorre e-mail correspondence with the author in March 2021

7. Waspair Super Gryphon advert in Glider Rider, October 1980

8. Wings (BHGA magazine) No. 53, June 1979, pages 13 and 24 or 25

9. Bob placed second at the European open championships at Kössen: Wings (BHGA magazine) October 1978

10. The Gannet reached production before the Sigma: Wings January 1980

14 thoughts on “Bob England, hang glider designer

  1. I remember Bob and his smiley face on the hills and around the meets.

    But I never really got that friendly with Bob. We just would chat, as he was one of the ‘gang’ of us very enthusiastic pilots, back in the day.

    Great shame we lost him.
    A very good, and clever bloke in our sport.

    Like

  2. You can’t be serious, that not many pilots knew of the ASG23? It was flown in the America’s Cup, featured in magazines, probably the most innovative and well-engineered prototype in history of HG, and the inspiration for the UP Comet. Roy flew it, I flew it and everyone knew about it.
    Some of this blog is fun reading to reminisce about old times but the historical context and scope is severely lacking.

    Like

    1. I had no idea that the ASG23 inspired the UP Comet. (I can only include info if I know about it.) I will attempt to find out what Tom Price and Roy Haggard say about that.

      John’s contributions to this history are, in my opinion, invaluable, but of course — inevitably — they are how he sees it.

      If the context and scope of this history are severely lacking, that is partly because it takes a lot of time to do. The work is ongoing.

      Like

    2. I should have been clearer, Steve. I meant that most pilots didn’t know about it since it was a never a production model.(at least, the carbon-fiber version with minimal double surface, no crossbar or king post, and a control bar braced by struts). Not being in SoCal or following the competition circuit, I lost track of it after seeing the prototype set up at Electra Flyer, where I worked in 1980. Since that didn’t look much like the double-surface Comet with its floating crossbars and conventional king post/wire bracing, I’m wondering if it’s possible that we are thinking of two different gliders?

      Like

  3. I must confess to being woefully ignorant of the ASG-23. I did a cursory search of the Hang Gliding archive (78-80) and it seems Albatross wasn’t actively advertising – maybe I missed it. In those days, if there weren’t glossy ads or one showing up at Ellenville I would never know a glider existed. Albatross gliders were always a rarity in my neck of the woods. Was it similar to the Dawn? I’m I to understand there was no crossbar?

    Like

    1. Struts instead of side wires and, yes, no crosstubes — like Dick Boone’s ProAir Dawn, as you say. (See here for the Dawn Comp.) However, it must have had something to hold the leading edges out, be they tubes or a different structure, doubtless well forward. The ASG23 had short truncated tips too; a Tom Price design characteristic. How it inspired the design of the Comet I have yet to find out.

      Like

    2. And, as usual, you have hit the nail on the head. The only info I saw about it is after the Comet was in production along with Comet clones such as the Bennett Viper. It appeared in the American cup competition, but Comets flew in that, so it did not occur to me that the ASG23 could have inspired the Comet. I rely for my info mostly on the American magazines, but my collection is incomplete. The Hang Gliding magazine article about that competition, written by Rich Pfeiffer, not only had no photo of the ASG-23, it failed to even mention it! Brian Milton’s write up in the UK mag included a photo of it from above and a couple of sentences. However, I found some more detailed info and a photo that shows it to advantage (although with a page fold in it) in Whole Air, so I will add that — most likely in one of the early 1980s chronology pages. (Although to have inspired the Comet, it must have appeared before early 1979, it seems to me.)

      Like

  4. No doubt the ASG 23 was the primary inspiration in the Comet. Perhaps some tiny contributions from Sweeney/Trampenau/others -Sirocco/Sensor 411B ( enclosed crossbar for glide and high speed performance), Thevenot (deflexorless drum-tight mylar supported sailwork for dramatic sink rate improvement – Atlas ), and Boone( floating crossbar to allow the thing to actually turn – Mariah). I won’t quote the over used bit about the “shoulders of giants”.

    Like

    1. But the only reports I have seen of the ASG23 were after Comets were flying. It is of course possible that the prototype ASG23 was flying before the Comet, but maybe it was not reported in the mags at the time or, if it was, I missed it or it is in a magazine that I don’t have. I am hoping for more info. Anyways, the new ASG-23 section on the Tom Price page is an improvement, I think.

      Like

      1. Yes, my initial statement was meant as a bit of sarcasm. Sorry about the confusion.

        Like

      2. No problem. I am easily confused! Especially by the many overlapping innovations of hang glider designers, often simultaneously and separately, often in combination, and equally often simply copied.

        Like

      3. I found a reference to Tom Price’s 1978 ASG 23, which apparently was markedly different from the 1980 version made by Canadian Ultralight Aircraft in Lumby, British Columbia. I updated ASG-23 in Tom Price’s flying machines. I would still like to know in what particular way it inspired the Comet, unless it was just its radical design.

        Like

  5. Thank you for creating this section dedicated to my friend; Bob England.

    I first met Bob in 1981 when he joined Delta Wing and I worked closely with him as an assembler and test pilot.

    Among the many gliders that we worked on was a nameless white glider with a 2″ wide black Velcro strip along the trailing edge of the under surface to adjust the attachment point.
    It predated the WillsWing HP !. that appeared about a year later;
    I found both gliders to be very similar in design; Bob’s however was markedly looser and better handling as I recall.

    His crowning achievement in hang glider design was a prototype that he made after he had left Delta Wing in I believe 1990 (?) called ” The Merlin”. It was 150 sq. ft. of Red Mylar with excellent handling and performance.

    It wasn’t until I flew the Magic Kiss some years afterwards (which closely resembled and flew similarly to the Bob’s Red glider ) that I realized what a true break through the Merlin had been.

    Bob haunted my dreams for decades after his death; but has thankfully finally gone quite.

    Blue skies and love above all
    Dino

    Like

Leave a reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s